Nucleon (Xinxiang) Crane Co., Ltd.
Add to Cart
Technical parameters of High-Duty Suspension Hoist | |||||||
Capacity | T | 1,2,3,5,10 | 16,20 | ||||
Span | m | 7.5-22.5 | |||||
Lifting height | m | 6,9,12,18,24,30 | 12,18,24,30 | ||||
Operation method | Pendent line with push button/ remote control | ||||||
Speed | Lifting | m/min | 8,8/0.8,7/07 | 3.5,3.5/0.35 | |||
Cross travel | m/min | 20,30 | 20,30 | ||||
Long travel | m/min | 20,30,45,60,75 | |||||
Electric hoist | type | CD/MD | CD/MD/HC | ||||
Working duty | A3 | A3 | |||||
Power supply | AC | 380V/50HZ/3P | 380V/50HZ/3P | ||||
| Safty features | 1. Overload protection:If the material is over the capacity, the hoist will give a sharp warning for protection itself. 2. Emergency brake:If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure. 3. Control Method:Room control or remote control to avoid any injure to the operation staff | ||||||
| Advantages | 1. Low-vibration, quiet-running motor 2.Fast acting brake 3.Gearbox lubricated for life 4. Protective rope guide 5. Frequency inverter for stepless travel motions | ||||||
| Working condition | The product applies to such an environment as no fire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20° C below zero and 40° C up zero, | ||||||
| Painting | Primer and finishing paint Color: according to your demand. Average thickness: about 100 microns. | ||||||
Rope reeving of High-Duty Suspension Hoist |
Main Parts of High-Duty Suspension Hoist | ||||||||||||||
|
After-sales Service promises:
Ⅰ. Quality problems of products sold by our company will be solvedas per the"Three Guarantees"system of our company by the "Three Guarantees"service team;
Ⅱ.Related personnel will be sent to the site immediately after receiving quality complaints(by call,letter or oral notice)from clients;
Ⅲ.Personnel involved in after-sales service shall be serious and considerate in handing the problem to make clients crane-free;
Ⅳ.In addition to solve quality problems,personnel involved in after-sales service shall train clients,answer their technical inquiries and related questions free of charge.
Ⅴ.Related cost for products with quality problem will be shouldered by our company.Our company charges for quality problems caused by clients (or problems after the warranty term ),but the charge will not be higher than the expense(or cast);
Ⅵ.Establish the client-orient concept to offer timely,serious,sonsiderate and complete service,and value the image of the all the time to serve the company and clients.
If you want to know more or don't understand, please contact us.